Stage audio equipment is widely used in practical life, especially in stage performances. However, due to the lack of user experience and low profession, the maintenance of audio equipment is not in place, and a series of failure problems often occur. Therefore, the  maintenance of stage audio equipment should be done well in daily life.

Firstly, do a good job of moisture-proof work

Humidity is the biggest natural enemy of stage audio equipment, which will cause the diaphragm of the speaker to undergo physical deterioration during the vibration process, thereby accelerating the aging phenomenon of the diaphragm of the speaker, which directly leads to the decline of the sound quality. In addition, humidity will aggravate the corrosion and rust of some metal parts inside the stage audio equipment, causing unexpected failures. Therefore, when using the speaker, the speaker should be placed in a relatively dry environment.

Secondly, do a good job of dust-proofing

Stage audio equipment is afraid of dust, so it is also very important to do a good job of dust prevention. When listening to CDs, it is difficult to advance and retract the disc, read the disc or even not read the disc, and the radio effect will be disturbed, which may be caused by dust damage. The damage of dust to stage audio equipment is very common but inevitable. Therefore, after use, the equipment should be cleaned in time to avoid excessive dust accumulation and affect the use of the equipment.

3. Finally, protect the cable

When connecting or disconnecting the cables of the stage audio equipment (including the AC power cable), you should grasp the connectors, but not the cables to avoid damage to the cables and electric shock. After the Guangzhou professional stage audio line has been used for a long time, the two ends of the line will inevitably be oxidized. When the wire ends are oxidized, it will cause the sound quality of the speaker to decline. At this time, it is necessary to clean the contact points or replace the plug to keep the sound quality unchanged for a long time.

Moisture-proof, dust-proof and cleaning work should be done in daily life to ensure the normal operation of stage audio equipment. Professional production of stage audio equipment manufacturers, always insist on producing high-quality equipment, so there is no need to worry about the quality of audio equipment, as long as you can do daily maintenance and maintenance, you can make the stage audio equipment play high-quality performance.