China Wholesale Wireless Microphone System Factory – Professional home karaoke KTV wireless microphone set wireless mic transmitter – Lingjie
China Wholesale Wireless Microphone System Factory – Professional home karaoke KTV wireless microphone set wireless mic transmitter – Lingjie Detail:
System indicators
Radio frequency range: 645.05-695.05MHz (A channel: 645-665, B channel: 665-695)
Usable bandwidth: 30MHz per channel (60MHz in total)
Modulation method: FM frequency modulation Channel number: infrared automatic frequency matching 200 channels
Operating temperature: minus 18 degrees Celsius to 50 degrees Celsius
Squelch method: automatic noise detection and digital ID code squelch
Offset: 45KHz
Dynamic range: >110dB
Audio response: 60Hz-18KHz
Comprehensive signal-to-noise ratio: >105dB
Comprehensive distortion: <0.5%
Receiver indicators:
Receiving mode: double-conversion superheterodyne, dual-tuning true diversity reception
Oscillation mode: PLL phase locked loop
Intermediate frequency: the first intermediate frequency: 110MHz,
The second intermediate frequency: 10.7MHz
Antenna interface: TNC seat
Display mode: LCD
Sensitivity: -100dBm (40dB S/N)
Spurious suppression: >80dB
Audio output:
Unbalanced: +4dB(1.25V)/5KΩ
Balance: +10dB(1.5V)/600Ω
Power supply voltage: DC12V
Power supply current: 450mA
Transmitter indicators: (908 launch)
Oscillation mode: PLL phase locked loop
Output power: 3dBm-10dBm (LO/HI conversion)
Batteries: 2x“1.5V No. 5”batteries
Current: <100mA(HF), <80mA(LF)
Use time (alkaline battery): about 8 hours at high power
Simple malfunction treatment
|
malfunction symptoms |
Malfunction cause |
|
No indication on receiver and transmitter |
No power on transmitter, receiver power is not connected properly |
|
The receiver has no RF signal |
The receiver and transmitter frequency bands are different or out of the acceptable range |
|
There is radio frequency signal, but no audio signal |
The transmitter microphone is not connected or the receiver squelch is too deep |
|
Sound guidance circuit malfunction |
|
|
Setting silent mode |
|
|
Audio signal background noise is too large |
Transmit modulation frequency deviation is too small, receive output electrical Level is low, Or there is an interference signal |
|
Audio signal distortion |
Transmitter modulation frequency deviation is too large, receiver output electrical Level is too large |
|
The use distance is short, the signal is unstable |
The transmitter setting power is low, and the receiver squelch is too deep. Improper setting of receiver antenna and strong battery interference around. |
Product detail pictures:
Related Product Guide:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for China Wholesale Wireless Microphone System Factory – Professional home karaoke KTV wireless microphone set wireless mic transmitter – Lingjie , The product will supply to all over the world, such as: Germany, Detroit, Egypt, With the growing of the company, now our products sold and served at more than 15 countries around the world,such as Europe,North America,Middle-east,South America,Southern Asia and so on. As we bear in our mind that innovation is essential to our growth, new product development is constantly.Besides, Our flexible and efficient operation strategies,High quality products and competitive prices are exactly what our customers are looking for. Also a considerable service brings us good credit reputation.
By Cora from Vietnam - 2017.10.27 12:12
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Renee from Roman - 2017.12.02 14:11
