China Wholesale Mic Transmitter Factories – Professional home karaoke KTV wireless microphone set wireless mic transmitter – Lingjie
China Wholesale Mic Transmitter Factories – Professional home karaoke KTV wireless microphone set wireless mic transmitter – Lingjie Detail:
System indicators
Radio frequency range: 645.05-695.05MHz (A channel: 645-665, B channel: 665-695)
Usable bandwidth: 30MHz per channel (60MHz in total)
Modulation method: FM frequency modulation Channel number: infrared automatic frequency matching 200 channels
Operating temperature: minus 18 degrees Celsius to 50 degrees Celsius
Squelch method: automatic noise detection and digital ID code squelch
Offset: 45KHz
Dynamic range: >110dB
Audio response: 60Hz-18KHz
Comprehensive signal-to-noise ratio: >105dB
Comprehensive distortion: <0.5%
Receiver indicators:
Receiving mode: double-conversion superheterodyne, dual-tuning true diversity reception
Oscillation mode: PLL phase locked loop
Intermediate frequency: the first intermediate frequency: 110MHz,
The second intermediate frequency: 10.7MHz
Antenna interface: TNC seat
Display mode: LCD
Sensitivity: -100dBm (40dB S/N)
Spurious suppression: >80dB
Audio output:
Unbalanced: +4dB(1.25V)/5KΩ
Balance: +10dB(1.5V)/600Ω
Power supply voltage: DC12V
Power supply current: 450mA
Transmitter indicators: (908 launch)
Oscillation mode: PLL phase locked loop
Output power: 3dBm-10dBm (LO/HI conversion)
Batteries: 2x“1.5V No. 5”batteries
Current: <100mA(HF), <80mA(LF)
Use time (alkaline battery): about 8 hours at high power
Simple malfunction treatment
|
malfunction symptoms |
Malfunction cause |
|
No indication on receiver and transmitter |
No power on transmitter, receiver power is not connected properly |
|
The receiver has no RF signal |
The receiver and transmitter frequency bands are different or out of the acceptable range |
|
There is radio frequency signal, but no audio signal |
The transmitter microphone is not connected or the receiver squelch is too deep |
|
Sound guidance circuit malfunction |
|
|
Setting silent mode |
|
|
Audio signal background noise is too large |
Transmit modulation frequency deviation is too small, receive output electrical Level is low, Or there is an interference signal |
|
Audio signal distortion |
Transmitter modulation frequency deviation is too large, receiver output electrical Level is too large |
|
The use distance is short, the signal is unstable |
The transmitter setting power is low, and the receiver squelch is too deep. Improper setting of receiver antenna and strong battery interference around. |
Product detail pictures:
Related Product Guide:
It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for China Wholesale Mic Transmitter Factories – Professional home karaoke KTV wireless microphone set wireless mic transmitter – Lingjie , The product will supply to all over the world, such as: French, America, Miami, We welcome you to visit our company & factory and our showroom displays various products that will meet your expectations. Meanwhile, it is convenient to visit our website. Our sales staff will try their best to provide you with the best services. If you need more information, please do not hesitate to contact us via E-mail, fax or telephone.
By Amelia from Thailand - 2017.09.09 10:18
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Edwina from Costa rica - 2018.05.13 17:00
